Скачать или смотреть Boosted Whipz Genesis 2024+ LED Emblem Install DIY EASIEST WAY!!

​‪@CampbellsCreations‬ DIY install on of ‪@BoostedWhipz‬ LED Emblem on the front of ‪@Condemzzz‬ 2020 Genesis G70. Straight forward procedure and high quality part! Scroll down for links and materials. How to install LED Emblem on a Genesis G70

Emblems come in 3 styles and light up red if wired to the brake light $190

https://www.boostedwhipz.com/product-...

The Genesis LED emblem uses an OEM badge and has been modified to add LED functionality. This is a dual mode LED emblem. Depending on how it's wired, it can illuminate in either white or red.

Uses 3M backing, so the original OEM emblem must be removed. We recommend professional installation if not handy with wiring or electrical experience. If placing it in the rear, drilling will be required to run the wires through. The front may require drilling. May require extending the cables as well, depending on the location it will be wired to.

BE EXTRA CAREFUL WHEN WASHING & DRYING VEHICLE. IF ANY FIBERS ARE CAUGHT ON THE TOP METAL LAYER OF THE EMBLEM, IT MAY TEAR OR BEND ONCE PULLED.

The emblem measures about 2in wide from the center logo and 9.506in long edge to edge. Please verify your current badge width.
There is no guide post on the back of the emblem. It is completely flat.

Note: For 2024+ Genesis G70, 2026+ GV70, and 2025+ GV80, they changed the infrastructure of the emblem on the front bumper. It's now molded into a cavity and held by 3 pillars with screws. This emblem isn't recommended for those years and models

SHOP ‪@BoostedWhipz‬ FOR ALL YOUR KDM COSMETICS AND CARBON FIBER
https://www.boostedwhipz.com/

1. Fishing line from Walmart outdoor section (any will do)
2. Bug and tar remover from Walmart or auto part store (any will do)
3. Heat gun
4. 22 gauge wires (amazon or auto parts store)
https://a.co/d/535EVwk
5. Quick Splice Connector (Amazon or auto parts store)
https://a.co/d/brM8HSP


#BOOSTEDWHIPZ #genesis #g70 #g80 #gv70 #gv80 #kdm #hyundai #diy #logo #emblem #led #campbellscreations ‪@CampbellsCreations‬


0:00 Intro
0:16 Old emblem vs new
1:02 How to remove old emblem
1:50 Removing old 3M tape
3:00 Drilling the hole for the wires
3:30 Where to wire the emblem to
4:31 Prepping the wires and install
7:51 Emblem placement
8:30 Final look