Dana 30 Weld In Axle Sleeves (No Pounding Required)

Описание к видео Dana 30 Weld In Axle Sleeves (No Pounding Required)

Its time to upgrade the Dana 30 a little bit more. The Sleeves from Iron Rock Offroad have arrived along with some cheapo outer seals from Bandai.
These are the final mods to the front Dana 30 High Pinion! Hopefully its a while before I have to visit it again but then again it is a Jeep....
Thanks for Watching.

   / @workshoptowilderness  
Support me on Patreon -   / workshoptowilderness  
Check out Jim's Overland Gear at GRABmeGEAR , Discount Code is MIKE10 - https://www.grabmegear.com/
Affiliate Link to EcofProducts - https://uk.ecoflow.com/pages/portable...
My Amazon Affiliate Store - https://www.amazon.com/shop/mcqbushcraft
Follow me on Instagram -   / workshopwildernessadventures  
Follow me on Facebook -   / workshop-wilderness-adventures-21275849708...  
Contact RJ at - [email protected]
Check out RJs Instagram -   / lil_rjs_jeep_crisis  

Useful Links
Offroading in Sweden - http://www.swedishepa.se/Enjoying-nat...
Road, Trail and Terrain Laws - https://www.svmc.se/smc/SMCs-arbete--...
Driving Private Roads Sweden - http://www.swedishepa.se/Enjoying-nat...
Wikiloc Trails - https://www.wikiloc.com/trails/offroa...
Road Map - https://nvdb2012.trafikverket.se/SeTr...

Jeep Spec:
1999 Jeep Cherokee XJ 2.5TD RHD.
Summer Tire - 35x12.50r15 BFG KM3's with 15x8 3.75" backspacing (-19 offset).
Winter Tire - Cooper Discoverer ST MAXX Por Studded 35x12.50r15 BFG KM3's with 15x8 3.75" backspacing (-19 offset).
Lift Front - RC 4.5" Coils and N2 Shocks (3" Coil Spacer).
Front Shock Bar Pin Eliminator.
Dana 30 High Pinion with Artec Industries Lower Control Arm Mounts with modified upper mount and modified Track Bar mount.
Front RC Control Arm Drop Bracket.
Ruff Stuff Short Arm Single Himes.
RC Extended Sway Bar Links.
Dana 30 Rock Crusher Diff Cover.
Ruff Stuff One Ton OTK Steering.
6" Lift Drop Pitman Arm.
Ruff Stuff Front and Center Frame Stiffeners.
Rear DIY Frame Stiffener and Rear Frame Tie in Kit.
6" x 2" Box Rocker replacement with Tube Slider.
Modified Factory Bumper with Side Sliders.
Rear Tow Hitch Tire Carrier that bolts into Rear Frame Tie in Kit.
Modified upper Shock Crossmember for Rear Shocks
Rear Axle Chrysler 8.25 29 Spline with modified High Clearance Shock Mounts.
Rear Shocks 6.5" Trailmasters.
Rear Leaf Springs 5.5" Rubicon Express
Rear RC Shackle Relocation Bracket.
Stainless Steel Braided Brake Lines front and back.
Warrior 9500lb Winch.
Front Bumper - Ebay Custom Made.

Комментарии

Информация по комментариям в разработке