{576} CYN17-3 PhotoTransistor Optocoupler Tester / How To Test OptoCoupler Opto-Isolator

CYN17-3 PhotoTransistor Optocoupler Tester / How To Test Opto-Coupler Opto-Isolator. The CNY17 is an optically coupled pair consisting of a gallium arsenide infrared emitting diode optically coupled to a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and output. The CNY17 can be used to replace relays and transformers in many digital interface applications, as well as analog applications such as CRT modulation. CNY17-1/2/3 are also available in white package by specifying -M suffix (eg. CNY17-2-M)
UL recognized (File # E90700), VDE recognized, 102497 for white package
Current transfer ratio in select groups. High BVCEO—70V minimum
available part numbers in same family. CNY17-1, CNY17-3, CNY17-2, CNY17-4
The CNY17-3-000E optocoupler contains a light emitting diode optically coupled to a phototransistor. It is packaged in a 6-pin DIP package and available in wide-lead spacing option and lead bend SMD option. Collector-emitter voltage is above 70 V. Response time, tr, is typically 5 us and minimum CTR is 40% at input current of 10 mA.
Features
High input-output isolation voltage (Viso = 5000 Vrms 5.3KV)
Current Transfer Ratio (CTR: min. 40% at IF = 10 mA, VCE = 5 V)
Response time (tr: typ., 5 ms at VCC = 10 V, IC = 2 mA, RL = 100 Ohms)
Dual-in-line package
UL approved
CSA approved
IEC/EN/DIN EN 60747-5-2 approved
Applications
System appliances, measuring instruments
Signal transmission between circuits of different potentials and impedances
Feedback circuit in power supply
Applications
Power supply regulators, Digital logic inputs, Microprocessor inputs, Appliance sensor systems, Industrial controls, Switch mode power supplies, Computer peripheral interface, Microprocessor system interface
System appliances, measuring instruments, Signal transmission between circuits of different potentials and impedances, Feedback circuit in power supply
CYN17-3 PhotoTransistor Optocoupler,cyn17-3,How To Test OptoCoupler,How To Test Opto-Coupler,How To Test OptoIsolator,How To Test Opto-Isolator,optocupler,opto-electronics,haseeb electronics,optocoupler working,what is optocoupler,opto isolator,how to test opto,how to test optocoupler,how to test optocoupler with digital multimeter,how to test optocoupler using multimeter,how to test opto isolator,how to test opto isolator ic,6 pin optocoupler ic,optocoupler ic