Lowrence Hook2 4x Bullet Transducer Shoot Thru Hull Installation

Описание к видео Lowrence Hook2 4x Bullet Transducer Shoot Thru Hull Installation

Video is of installation of the Lowrence Hook2 4x install as well as the bullet transducer location for shooting thru the hull of your vessel. 5 minute quick setting apoxy glue was used.

Always use painters tape on fiberglass drilling to keep the firberglass from chipping. Make sure to use the proper sized drill bits when drilling fiberglass, and use a pilot hole. After your pilot hole is set you can use a regular drill bit and put the drill driver gun in reverse as to not chip the fiberglass with the bigger drill bit.

Purchased glue from Home Depot.

Purchased Hook2 from Lowrance.com

Комментарии

Информация по комментариям в разработке

Похожие видео