Wire wrap pendant tutorial.

Hello and welcome to my latest tutorial.

To make this pendant you will need -
• 0.8mm wire (20g), 4 x 9" (23cm).
0.6mm wire (22awg) 2" (5cm) and 2 x 1" (2.5cm)
• 0.315mm weaving wire (28g) 100cm (I wind mine onto a bobbin, but you can cut lengths as you go if you prefer).
• Oval cabochon, mine is 25mm by 15mm (you can use a different size, remember to adjust wire length and weave repeats accordingly).
• Decorations, a little leaf, 2 x 3mm beads, 2 x 2mm beads.

FOR STONESCART, visit stonescart.com and enter code 'KJJ10' at checkout for 10% off your order.

I no longer put links to tools on here.
The tools I use are:
• Tronex needle nose pliers
• Tronex short round nose pliers
• Tronex razor flush cutters
• Beadsmith flat nose nylon jaw pliers
• Occasionally I use tronex bent nose pliers
• Occasionally I use heavy-duty wire cutters
• Occasionally I use xuron needle nose pliers
• Bobeeze bobbins (medium size with no extra weights)

My Etsy shop - https://www.etsy.com/uk/shop/KellyJon...
Facebook -   / kellyjjewellery  
IG - kellyjjewellery

Thanks for watching x

Music is free from YouTube;
Invisible Beauty - Aakask Gandhi


©2023 Kelly Jones Jewellery All Rights Reserved

Please do not copy or share this content!
This content is created for me (Kelly Jones Jewellery) as a means to promote my tutorials.
Do not share or reproduce this content in any format.
Thank you!