How to Ski Tour | #7 Bindings | Tutorial | DYNAFIT

Schorsch Nickaes, DYNAFIT Product Director and Mountain Guide shows how to start ski touring. He gives information about the do's and don'ts when stepping into a tech binding.

Schorsch´s advices in a nutshell:
// Tip 1: The binding has to be in step in mode, therefore push the lever down.
// Tip 2: Step in from behind with a 30 degree angle until the inserts hit the pins and press the toes down.
Don'ts: Do not twist your foot!
Do's: Step in from the back to the front until the inserts hit the pins!
// Tip 3: Lift the heel two times and block the binding by pulling the lever all the way up.
Don´ts: Do not only put the lever a little up but all the way otherwise the binding is not blocked for walking!
Do's: The binding is blocked, when you hear a click sound.
// Tip 4: How to get into the binding in deep terrain.
Don´ts: Do not step in the ski in deep powder and with the ski on uneven terrain
Dos: Create a little plateau with your ski, which is 90 degrees to the surface. First step in with the downward leg.

To find your perfect tech binding contact your local dealer: //https://www.dynafit.com/storelocator​ or visit our website: //https://www.dynafit.com/equipment/bin...

If you want to get even more informations about How to Skitour check out the long version of our video: //   • How to Ski Tour | Long version | Tuto...  ​
or read the blogstory on our website: //https://www.dynafit.com/how-to-skitour​

Furthermore - did you know there is Lifetime Guarantee on our bindings? Learn more: https://www.dynafit.com/lifetime-guar...

#speedup #skitouring