Kangertech Subtank Mini Airflow/Base disassembly

Hey guys, as you can see on this video i 'm showing you how to

disassemble the airflow/base part of the Kangertech Subtank Mini.

Before i opened it i was getting a very bad taste i thought it was

the peek insulator problem so i changed to the occ 0.5/1.2 heads

but i was still having the same shit taste so i opened it, it was a

little bit hard the first time but i managed to do it, guess what? i

have found a melted O ring, i'm not sure it was a O ring or glue but

it had an orange color as the other O rings, i cleaned it and put

everything back together and the bad taste is gone,

lol and anyway even if i haven't had the bad taste i was going to

open it to see how it works! i can't help it

Caution:

Pay attention when you disassemble it because you may loose the tiny

spring and the ball bearing and without these two tiny pieces your

airflow ring wont stay in place, since the spring pushes the bearing

ball into the grooves, this is where the click sound comes from and

this is what keeps the airflow ring in place between the different

airflow holes.

I hope this will help!

Snifrou