Скачать или смотреть Swimming pool pump motor repair

I have replaced my old motor which stopped working due to worn out ball bearings.
It simply won't start... and it happened in the middle of the summer heat.
Here is the link to that video:    • Swimming Pool Pump Motor Replacement - Sta...  
I ordered a chip China made replacement on Amazon just because of the fastest delivery.
Unfortunately, in a few weeks the motor began overheating and tripping the thermal fuse.
It happened approximately after 30 minutes to 1 hour of work and required about an hour to cool down.
Not cool, literally. So I ordered a good motor but had to wait for its arrival struggling with that replacement.
After I replaced it with a good quality motor, I decided to bring the original motor to a working condition.
So if the new motor failed, I would quickly swap it with the original one until the replacement comes.
And I opened up that cheap motor and compared it with the original one.
Yes, windings on that cheap motor were thinner and of aluminum wire so it was no wonder it could not handle the load.
Original windings were of larger diameter and of copper wire.
The mounting plate of original motor was heavily corroded to the point that big chunks of it were missing.
However, it still had enough means to be mounted and to be working for quite some time, which is my goal.
Took just a pair of new ball bearings and a few hours of cleaning/painting job.