Скачать или смотреть Pocket Case EX. The first full-body, play-through case designed specifically for Analogue Pocket

Pocket Case EX. The first full-body, play-through case designed specifically for Analogue Pocket.

More info at:
https://www.brent-tech.com/

Available for purchase through Etsy and eBay:
https://www.etsy.com/listing/1571895594
https://www.ebay.com/itm/295994394788

This is a custom designed, full-body, play-through case/shell for the Analogue Pocket handheld game system. It's a two-piece, 3D-printed shell made from an eco-friendly, bioplastic material known as PLA. The case has seven individual felt lined channels on all interior sides, interior back, and interior top & bottom, protecting Pocket during insertion and removal. The felt is made from long-lasting, fine touch polyester. The Analogue Pocket slides down into the bottom case, then the top is placed over. The two pieces are secured by a set of included two M2.5 16mm bolts and nuts.

A generous cutout is present at the bottom of the case to allow for all ports to connect, as well as the sides for power, volume, and micro SD card access. Additionally, sixteen speaker hole cutouts are present, eight on each side, designed to allow audio to pass through without interference.

A lot of work went into modeling and prototyping this case. I carefully manufacture and test each one using my own Analogue Pocket. It takes several hours to produce just one case and I make sure that each one passes my level of quality assurance. Black cases are usually in stock and can ship out the next day. Other colorways typically ship within 1-3 business days.

DMG (1989)
Red (1995)
Black (1995)*
Clear/translucent (1995)
Green (1995)
Yellow (1995)
White (1995, Japan & UK)*
Blue (1995, Europe)
(C) Berry (1998)
(O) Grape (1998)
(L) Kiwi (1998)
(O) Dandelion (1998)
(R) Teal (1998)
Atomic Purple (1998)
Famicolor Micro Iridescent (2005)**
Atomic Smoke (2023)***
Atomic Red (2023)***
Atomic Blue (2023)***
Atomic Green (2023)***
Atomic Orange (2023)***
Glow in the Dark (2023)***

*The Black and White colorways come from filament manufactured and supplied in the USA. 🇺🇸

**The Famicolor Micro Iridescent colorway comes from a dual-color filament based on the original Famicom maroon/purple and gold design.

*** To coincide with Analogue's Limited Edition Pocket series, these cases are now also available in glow-in-the-dark and 5 new translucent colors. It's hard to photograph, but since the translucent case colors are partially see-through, note that you will see through to the black felt lining the case.