D16Y7 to B16A2 conversion using the D16Y7 engine harness

( Please over look the mess in the garage and background noise coming from the neighbors)

Converting the D16Y7 onto the B16A2 was straight forward. The only issues I ran into were 3 OBD2 sensors I am not familiar with.

I did have to cut 2 sensors but didnt extend anything just simply unwrapped the loom far back enough to re directly a couple of sensors.

There were two connectors I hade to swap over and that was the intake temp sensor and the IACV. Intake temp sensors being the wrong shape and converting the IACV from 3 wire to 2 wire. Disregarding the orange wire entirely.

Honda connectors C102 , C114 & C125 ( CKF , EVAP PURGE & Downstream 02 sensor ) these sensors will not be hooked up to anything so I neatly have them set aside in case I do later on.

I did have to purchase a 02 extension harness and I grabbed that from Rywire to complete the engine harness conversion.

Thanks to Cameron Grady @dynodesigns615 & @neds_speedshop for donation the sensors I needed for the Intake Temp Sensor and the IACV.

Thanks to Monotech for provided the jumper harness and VTEC subharness to run the P28


link for the 3 wire to 2 wire IACV conversion

https://www.hamotorsports.com/pages/3...