Скачать или смотреть Dell The hardware jumper removed to override the system password setting hardwar jumper.DellOptiPlex

Dell Security Manager
The hardware jumper is removed to override the system password setting. System password has been erased and password cannot be changed.
When the system displays: "The hardware jumper is removed to override the system password setting. System password has been erased and password cannot be changed. Please connect the hardware jumper to perform any password changes," it signifies that:

Jumper Absence: The system detects that the password reset jumper is not in its default position.

Password Status: Without the jumper in place, the system password has been cleared, and you cannot set a new password until the jumper is correctly positioned.
Open the computer case to locate the motherboard.

Locate the Password Jumper:

Refer to your Dell OptiPlex 3060 manual to find the exact location of the password reset jumper. It's typically labeled as "PSWD" or "PASSWORD."

Verify Jumper Position:

Ensure the jumper is placed on the correct pins as per the default setting. If it's missing, you may need to obtain a replacement.

Reassemble and Power Up:

After positioning the jumper correctly, close the case, reconnect the power cable, and turn on your computer.

If the issue persists after following these steps, consider reaching out to Dell Support for further assistance

"Dell Security Manager hardware jumper issue" on an OptiPlex 3060:

Dell Security Manager

Dell OptiPlex 3060 BIOS reset

How to fix Dell hardware jumper error

System password erased Dell

Dell password reset jumper

Dell OptiPlex 3060 troubleshooting

Hardware jumper missing error

Dell BIOS password reset guide

Fix Dell system password issue

Dell motherboard jumper settings

Dell security settings reset

OptiPlex 3060 system repair

Dell BIOS troubleshooting

Dell password change not allowed

Dell hardware jumper fix tutorial