» Mini Talon Overview - Gimbal, Parts, Setup & More

This video is an overview of my Mini Talon.

VIDEO INDEX

0:00 - Intro
0:33 - FPV Camera
0:42 - Canopy
0:59 - Gimbal (part 1)
1:22 - VTX
2:02 - Hatch
2:50 - Flight Controller
3:40 - GPS
3:42 - Receiver
3:53 - Motor & Prop
4:27 - Tail Skid
4:38 - ESC
4:47 - Nose Skid
5:00 - Servos
5:12 - Laminate Film
5:30 - Control Surface Travel
5:52 - CG
6:05 - Batteries
6:28 - Weights
6:49 - Glue
7:03 - Ground Station
7:34 - Gimbal (part 2)

LINKS

» RCGroups Mini Talon Thread - https://www.rcgroups.com/forums/showt...
» Stunt Double's Thingiverse - https://www.thingiverse.com/StuntDoub...
» Eagle Tree Vector Config File - https://www.dropbox.com/s/nbf53kp2s8f...
» Gimbal Control arduino code - https://www.dropbox.com/s/wwrr3vnox7j...
» MarkQ Mini Talon Parts Catalog - http://www.itsqv.com/QVM/index.php?ti...

MINI TALON SETUP

» Aileron Travel = +/-9mm
» Elevator Travel = +/-5mm
» Rudder Travel = +/-5mm
» CG = 58mm
» Weight (with gimbal) = 1377g
» AUW (with gimbal & Multistar 4S 4000) = 1704g

MINI TALON PARTS:

» FPV Camera = Runcam Swift Mini (version 2 available now) - https://shop.runcam.com/runcam-swift-...
» Streamlined Canopy = MarkQ #47001 - http://www.itsqv.com/QVM/files/canopy...
» Gimbal = Quanum FY Mini 3D PROS - https://hobbyking.com/en_us/quanum-fy...
» VTX = RMRC 1.3GHz 800mW - https://www.readymaderc.com/products/...
» VTX Holer = 1.3GHz VTX Mount - https://www.thingiverse.com/thing:283...
» VTX Antenna = IBCrazy Homemade Inverted Vee - https://www.rcgroups.com/forums/showt...
» Air Intake = MarkQ #52106 - http://www.itsqv.com/QVM/files/parts/...
» Flight Controller = Eagle Tree Vector - http://www.eagletreesystems.com/index...
» Flight Controller Tray = Mini Talon Anti-Vibration Flight Controller Tray (Long version) - https://www.thingiverse.com/thing:247...
» Regulator = Castle Creations 10A BEC - http://www.castlecreations.com/en/cc-...
» UHF Receiver = EzUHF 4CH Receiver - https://www.immersionrc.com/fpv-produ...
» UHF Receiver Antenna = IBCrazy Homemade Dipole - https://www.rcgroups.com/forums/showt...
» Motor = SunnySky X2216 1250KV - https://www.banggood.com/SunnySky-X22...
» Propellor = Aeronaut 8x6 CAM Folding - https://www.xc-rc.com.au/index.php?ma...
» Centrepiece = Aeronaut 42mm - https://www.xc-rc.com.au/index.php?ma...
» Prop Stopper = 3D Printed
» Tail Skid = MarkQ #52105 - http://www.itsqv.com/QVM/files/parts/...
» ESC = Turnigy Plush 40A - https://hobbyking.com/en_us/turnigy-p...
» Nose Skid = MarkQ #52103 - http://www.itsqv.com/QVM/files/parts/...
» Servos = Emax ES08MA II - https://www.banggood.com/EMAX-ES08MA-...
» Laminate Film = Aldi Laminate Pouches
» Flight Batteries = Multistar 4S 4000/5200/8000 - https://hobbyking.com/en_us/batteries...
» Glue = UHU Expanded Polstyrene - http://www.newtownartsupplies.com.au/...
» Ground Station Antenna = Yagi Antenna FPV 1.2GHz with assorted mounts - https://www.thingiverse.com/thing:239...

If you have any questions about this build, please leave them in the comments below.

Cheers,

Stunt Double