Скачать или смотреть etrailer | Ultimate Overview of the Trailer License Plate Mount Bracket, Heavy Duty Zinc Steel

Click for more info and reviews of this Optronics License Plates and Frames:
https://www.etrailer.com/Accessories-...
Check out some similar License Plates and Frames options:
https://www.etrailer.com/dept-pg-Acce...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Optr...
Speaker 1: Today we're taking a look at a trailer license plate mount bracket. This trailer license plate bracket is extremely strong and durable. It does a great job at creating a solid area for your license plate to be mounted. It is made of heavy duty steel, and it's zinc coated, or zinc plated to resist rust and corrosion. It can be used with stud mounted license plate lights, as well as tail lights that have a built in license plate light. So, it can be installed directly behind your taillight assembly.

And as you can see here, it angles down and provides a great area for mounting your license plate. And then the light would be able to shine down, illuminating the license plate area.A few measurements to go over with you real quick to determine whether or not this will work for your application. The overall length of the unit, measuring edge to edge, is about 8 7/16 of an inch to 8 1/2 inches. The holes for mounting the license plate, you can see these are elongated and their separated apart from one another on center. So, center on center, is about, I'm going to say about 6 3/8 inches apart.

Right in that area. The holes for stud mounted taillights. That's these two holes right here. These are separated on center by two inches. The holes for a standalone license plate light, these right here, are elongated and their separated apart from one another on center by 2 1/4 inches.

And those smaller holes right there are separated on center by and inch and a quarter. The gap located right here at the top, has a gap measurement of 1 1/8 inches wide by 1 1/8 inches deep.And it's put together really well. Again, steel construction, heavy duty design. And it does have protective coating to keep it safe from rust and corrosion. That's going to do it for today's look at the trailer license plate heavy duty mount bracket..