Скачать или смотреть What To Do If Your Light Bar Has Fully or Partially Stopped Working

An offroad LED light bar enhances the visibility of a vehicle at night on rural sites, or in remote areas. If your light isn’t working properly, there are a few possible reasons.

We do not recommend disassembling your light at any stage of troubleshooting. Doing so will void any warranty on the item/items.

✔️ What To Do If The Lightbar Does Not Work?

1. Connect the light directly to a 12VDC power source to confirm that it is not defective. Connect the light to the vehicle’s battery or similar power supply.

Make sure to connect after unplugging it. If the light is working normally, there must be a problem with the wiring, so go on to the next step;

2. Ensure that the switch is on, and verify that it is still receiving power (the light will illuminate).

3. Make sure there are no loose wires in the wiring harness.

4. Inspect the earth/ground to make sure it is still solid.

In the case of a light that has failed to fire up through a direct power source, the problem lies with the light. For more information, please use our warranty form.

Here is an article to show you how to process it
https://bit.ly/3vzAPbP

Follow our Linkedin page: https://bit.ly/3rdo985
Contact us if you would like to become our distributor: [email protected]