How to Replace Rear Axle Shaft Bearing 2003-2011 Mercury Grand Marquis

Buy Now!
New Axle Shaft Bearing from 1AAuto.com http://1aau.to/ib/TKAXX00078

This video shows you how to install a rear axle bearing on your 2003-2011 Mercury Grand Marquis. If you hear a grinding or groaning noise while your vehicle is rolling, it might have a worn out wheel bearing. A worn bearing can allow the wheel to wobble, creating a host of other issues. To save yourself from more headaches down the road, replace your bearing right away. For solid rear axles, you'll need to replace the axle seal too.

This process should be similar on the following vehicles:
2003 Mercury Grand Marquis
2004 Mercury Grand Marquis
2005 Mercury Grand Marquis
2006 Mercury Grand Marquis
2007 Mercury Grand Marquis
2008 Mercury Grand Marquis
2009 Mercury Grand Marquis
2010 Mercury Grand Marquis
2011 Mercury Grand Marquis

Tools you will need:
• Pry Bar http://1aau.to/oKx/1AXAA00020
• 10mm Wrench http://1aau.to/oNC/1AXAA00010
• 8mm Wrench http://1aau.to/ogI/1AXAA00011
• 10mm Socket http://1aau.to/oaRJ/1AXAA00017
• 13mm Socket http://1aau.to/oa9w/1AXAA00015
• 21mm Socket http://1aau.to/o5Z/1AXAA00043
• Air Compressor
• Bearing Race and Seal Driver http://1aau.to/ov/1AXAA00038
• Seal Puller http://1aau.to/ob/1AXAA00040
• Slide Hammer
• 3/8 Inch Socket http://1aau.to/obka/1AXAA00016
• Ratchet http://1aau.to/obka/1AXAA00016
• Socket Extensions http://1aau.to/oa9w/1AXAA00015
• Torque Wrench http://1aau.to/oaqi/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags http://1aau.to/oya/1AXSS00035
• Copper Anti-Seize
• Gasket Adhesive
• Gear Oil
• Liquid Thread Locker
• Petroleum Jelly
• Drain Pan http://1aau.to/oup/1AXAA00320
• Floor Jack http://1aau.to/oST/1AXAA00068
• Hammer http://1aau.to/oM4/1AXAA00091
• Razor Blade / Gasket Scraper http://1aau.to/ohu/1AXAA00280
• Wheel Chocks
• Wire Brush http://1aau.to/oqB/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.