6.2 Intake Manifold and Throttle Body Install on a 5.3 - 2014-2018 Silverado Sierra Tahoe Yukon

Welcome back guys! We are one step closer to getting some final dyno number for my 2014 Silverado.

In this video we are showing how to install 6.2 Intake Manifold and 6.2 Throttle Body. Be Sure to check out the part links from below.

This installation should work for the following vehicles but always double check for your specific model.

2015-2020 Tahoe
2015-2020 Yukon
2015-2020 Suburban
2014-2018 Silverado
2014-2018 Sierra

Note: The Performance Driveline driveshaft is currently not speed rated - only HP rated but it should be able to handle the higher speeds.

👉🏼 LINKS TO PURCHASE TOOLS & PARTS FEATURED BELOW👈🏼

#6.2ThrottleBody #SilveradoDIY #6.2IntakeManifold

⚠️Try anything shown in this video at your own risk ⚠️

********************************************************************
Associated Videos - AFM DOD Delete Series
********************************************************************
Full DOD delete series below:
Part 1 - Baseline Dyno:    • AFM Delete Part 1 - What is AFM? Silv...  
Part 2 - What Parts Do You Need    • AFM DOD Delete Part 2 - 2014 Silverad...  
Part 3 - Engine Removal:    • AFM DOD Delete Part 3 - How to Remove...  
Part 4 - Engine TearDown:    • AFM DOD Delete Part 4 - Complete Engi...  
Part 5 - Installing New Parts:    • AFM DOD Delete Part 5 - Cam and Head ...  
5A - Cam Phaser Install:    • AFM DOD Delete - How to Install Cam P...  
5B - Trunnion Upgrade:    • How To Upgrade GM Trunnions - CHE Pre...  
5C - Lashing HP Fuel Pump:    • How To Properly Lash High Pressure Fu...  
5D - Injector Seals    • High Pressure Fuel Injector O Ring Se...  
Part 6 - Reinstalling Engine:    • AFM DOD Delete Part 6 - How To Instal...  
Part 7 - Tuning and Dyno Run:
Part 8 - Installing Intake Manifold, TB, Air Intake, & Driveshaft:
8A: AIRAID Intake:    • Silverado 6.2 AIRAID Intake Install o...  
8B: 6.2 Intake Manifold and TB:    • 6.2 Intake Manifold and Throttle Body...  
8C: Drive Shaft:    • 2014-2018 Silverado Driveshaft Fix - ...  
Part 9 - Tuning and Final Dyno Run:

************************
🔩Parts (Affiliate Links)
************************
For the parts needed to delete AFM check out:    • AFM DOD Delete Part 2 - 2014 Silverad...  

6.2 Intake Manifold and Throttle Body:
https://geni.us/GPI_62_IntakeManifold

You will also need GM Part: 12650610 https://geni.us/GM12650610 if you are not running a catch can setup. This Part is available as an optional add on through the above GPI link.

Intake Manifold Gaskets 12626354 (x8): https://geni.us/GM12626354

**********************
Tools (Affiliate Links)
**********************
EastWood Rolling Cart: https://geni.us/EW_RollingShopCart

1/4" Torque Wrench: https://geni.us/GW_14_TorqueWrench

Milwaukee 3/8" Ratchet: https://geni.us/MW_2557-20_Ratchet

Wobble Sockets: https://geni.us/WobbleExt

***********************************
⚙️Torque Specs
***********************************
Torq Spec 1: 89 In-Lbs
Torq Spec 2: Pass 1: 44 In-Lbs Pass 2: 89 In-Lbs

******************************************
🎬 Recording equipment (Affiliate Links)
******************************************
📷 Video
Canon EOS 80D Digital SLR: https://geni.us/Canon-EOS80D

----------
Thank you to all of our fans and subscribers for supporting us on our journey!

FOLLOW US ON INSTAGRAM: @THESUNDAEDRIVE

CHECK OUT OUR WEBSITE & BLOG: www.thesundaedrive.com