Is ANDREW TATE going to be impressed of how i connected the stand pipe to van’s diesel fuel tank?

In my opinion this is the easiest and fastest way to connect your stand pipe to the diesel fuel tank of a Citroen Relay (Jumper), also would work on Fiat Ducato and Peugeot Boxer 2006 onwards.

DISCLAIMER

PLEASE READ THE FOLLOWING VERY CAREFULLY!

THE PROCESS PRESENTED IN THIS VIDEO IS MY OWN EXPERIENCE.

I AM NOT A PROFESSIONAL DIESEL PIPE FITTER OR A MECHANIC SO I DON’T TAKE ANY RESPONSIBILITY FOR ANY DAMAGE OR LOSS OR INJURY THAT MAY OCCUR TO YOU OR YOUR POSSESIONS. IF YOU FOLLOW THE PROCESS PRESENTED IN THIS VIDEO YOU FULLY UNDERSTAND THAT YOU ARE DOING IT ON YOUR OWN RISK.

PLEASE DO MORE RESEARCH BEFORE YOU INSTALL YOUR STAND PIPE INTO THE DIESEL TANK, OR GET SOME PROFESSIONAL TO DO IT FOR YOU.

PLEASE MAKE SURE YOU COVER THE OTHER END OF THE BLUE HOSE WITH A CAP (YOU CAN USE THE CAP THAT COMES ON THE JP HEATER FUEL IN PIPE AS I DID), IN CASE YOU DON’T INSTALL THE PIPE TO THE HEATER IN THAT DAY.

IF YOU DON’T COVER THE OTHER END OF THE BLUE HOSE, AND YOU START THE ENGINE OF THE VAN, DIESEL WILL COME OUT THROUGH THE HOSE.

PLEASE MAKE SURE YOU PLACE ALL THE COVERS BACK AND CONNECT THE BATTERY AND CLOSE THE TANK. (PARTS THAT ARE NOT SHOWN IN THIS VIDEO)

THANK YOU.

ENJOY THE VIDEO!

NEW STAND PIPE: https://www.ebay.co.uk/itm/403776540469


ADHESIVE: https://www.screwfix.com/p/araldite-2...