Cyclops Designs 400mm Press Brake unboxing and testing

I recently had a job come in where I needed to bend some 2mm sheet steel. Now I don't have a press brake that would do that so I went on the search for one.
This video is about the one I found on eBay, the Cyclops press brake.
I believe they are made in low volumes, but none the less the one I received seems very well made. It had a few issues in my mind and I point these out in the video. Take a look!

Some of the spec on the Press Brake that I bought from Ebay:

Made in Sheffield, England
Heavy duty construction 15mm beam/base, webbed based for extra rigidity
Adjustable V plates to allow for thicker material and adjusting the bend radius min width 10mm max approx 35mm
Heat treated C45/EN8 15mm x 60mm- Multiple fingers, widths 150mm, 100mm, 75mm, 50mm & 25mm
Adjustable back stops, up to 75mm, fully removable to allow clear access
400mm max bend width- Max thickness at 400mm, 4mm
Runs on linear bearings with spring return- 25mm dia guide bars
Overall width 520mm- weight 35kg
Some tools included

There are 2 other sizes available. The seller has a video on the Press that I have included below:
   • Press Brake attachment for hydraulic ...  

Link to my Sealey 20tone press:
https://www.sealey.co.uk/product/5637...