Fliteboard Hand Controller Pairing

How to pair the Fliteboard remote control (Hand Controller Pairing)

1. Put the battery into the board and connect it
2. Switch on remote control (press mode and plus button for 3 seconds)
3. Magnet on the battery
4. Press plus button of remote control for 7 seconds until pairing message appears
5. Start pairing with "Mode" button
6. Hold the lower end of the remote control to the hollow between the 2 power cables on the board
7. The pairing is finished when the LEDs are green.
8. Pull trigger - press minus - go

More info about the Fliteboard and other eFoils at: https://e-surfer.com/en/shop/efoil/

+++++++++++++++

Do you like our videos? Then subscribe to this YouTube channel and visit our website https://e-surfer.com/en/.

e-surfer.com is testing eSurfboards since 2017 and is one of the biggest dealers in Europe for eFoils and Jetboards.

🇩🇪 Deutscher Kanal unter @eSurfbrett Kanal von E-Surfer

We are service center for brands like Lift Foils, Lampuga, etc. and you can test the boards in our stores before buying and get detailed advice.

🛒 You can find more about our products at: https://e-surfer.com/en/shop/.

🆕 If you don't want to miss any of our product news, you can subscribe to our Facebook Channel:   / efoilandjetb..  .

Since we are active in the field of electric surfboards for almost 5 years, we are also the founders of several forums:

👨‍👩‍👧‍👦 e-surfer forum: https://forum.e-surfer.com

👨‍👩‍👧‍👦 eSurfboard Facebook Group:   / jetboard  

👨‍👩‍👧‍👦 eFoil Facebook Group:   / efoil  

Have fun browsing!

Andreas from e-surfer.com 🏄🏻‍♂️

+++++++++++++++