How to replace the Front CV Axle 2009-2014 Ford F150 🚗

Find the parts used in the video on CarParts.com just there https://carparts.solutions/F150

⚙️ NEEDED CARPARTS AND PRODUCTS
- Driveshaft : https://carparts.solutions/FrontCVAxl... and https://carparts.solutions/FrontCVAxl...

- Brake cleaner : https://carparts.solutions/BrakeCleaner

- Grease

💪 TIGHTENING TORQUES
- Front Integrated Wheel End (IWE) bolts : 9 Ft-lbs

- Tie rod end holding nut : 85 Ft-lbs

- Upper control arm ball joint : 85 Ft-lbs

- Wheel hub nut : 30 Ft-lbs

🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Ford F-150 :
- https://carparts.solutions/ToolBox

List of the tools we used to replace the driveshaft on a Ford F-150 :
- Hydraulic jack : https://carparts.solutions/FloorJack
- Jack stands : https://carparts.solutions/JackStands
- Wheel lug wrench
- Flat head screwdriver
- Crowbar
- Ratchet
- Calliper
- Fork
- Breaker bar
- 8mm socket
- 10mm socket
- 15mm socket
- 21mm socket
- 22mm socket
- Hammer
- Large flat head screwdriver
- Paper towel
- Torque wrench : https://carparts.solutions/TorqueWren...

Don't forget to subscribe :    / @carpartscomofficial  

🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
- 2009 Ford F150
- 2010 Ford F150
- 2011 Ford F150
- 2012 Ford F150
- 2013 Ford F150
- 2014 Ford F150

📽 🛠 USEFUL VIDEOS 🛠 📽
- How to jack your Ford F-150 safely :    • How to jack your Ford F150 safely ? ⬆ 🚗  

- How to replace the Outer Tie Rod 09-14 Ford F150 🚗 :    • How to replace the Outer Tie Rod 2009...  

⚠️ CARPARTS.COM'S INFOS
To ensure that the part is properly installed during reassembly, measure the distance between the end of the drive shaft thread and the hub with a calliper.

To prevent the wheel knuckle unit from falling off, lift the front axle slightly with a jack while being supported by the lower control arm.

🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.

📚 CHAPTERS
0:00 Intro
0:10 Remove the driveshaft
4:05 Preparation prior to installation
4:38 Install the new driveshaft