Beacon Probe Review and tutorial

IMPORTANT NOTE: Noticed that accuracy test and probing had issue on my probe. Beacon dev spotted the issue and the temp sensor on the probe is broken.You can see the reading of the themp going nuts on the mainsail screen. I must have broken it when I did the de-soldering and re-soldering. Since it does temp compensation, I get weird accuracy and reading in this video. He also thinks that it explains the wave you seen in the bed mesh. Accuracy is coming out in the range of 10-50 micron instead of 0.4 micron. So even with a broken brobe it was awesome, I can't wait to try again with a perfectly working unit :)

https://beacon3d.com/product/beacon/

00:00 Intro
02:33 Mounting
05:47 Klipper installation/config
13:03 Calibration
17:38 Mesh result
20:22 2000mm/s probing test
21:45 Conclusion

-Vz-HextrudORT: https://s.click.aliexpress.com/e/_DEZ...
-Goliath: available on resellers and soon on Aliexpress
-Fly Super 8: https://s.click.aliexpress.com/e/_A8mOXD
-Drivers https://s.click.aliexpress.com/e/_AFDBtp
- XY Motors: https://s.click.aliexpress.com/e/_9iN6y9
-Alu Water cooling blocks: https://s.click.aliexpress.com/e/_Dn5...
-Fittings: https://s.click.aliexpress.com/e/_DEV...
-water cooling kit: https://s.click.aliexpress.com/e/_Dnc...
-CPAP fan: https://s.click.aliexpress.com/e/_Dmk...
-CPAP tube: https://s.click.aliexpress.com/e/_A9rUYd
-48V PSU: https://s.click.aliexpress.com/e/_Dcf...
(complete part list can be found on the BOM list on github link below)
-Eibos filament dryer: https://s.click.aliexpress.com/e/_Dc7...


Full VzBoT Printer project: (BOM, cad, stl): https://github.com/VzBot3D/

CNC Parts on Mellow Store Aliexpress or https://f3d-racing-fdm.myshopify.com/

Visit Mellow Store for VzBoT parts: https://mellow.aliexpress.com/store/g...

Please join us on FB:   / 4098868770205560  
Disord:   / discord  

If you wish to support: https://ko-fi.com/vez3d