Скачать или смотреть 11.6.9 Configure NIC Teaming

You are the IT administrator for a small corporate network. You use CorpServer for your production server and need to have the most throughput possible. As a result, you need to configure NIC teaming.

In this lab, your task is to configure a NIC team on CorpServer as follows:

Move the network cable from the onboard adapter in CorpServer to the 4-port NIC and to port 22 on the switch.
Connect network cables from remaining ports on the 4-port NIC on CorpServer to switch ports 19, 20, and 21.
Configure the adapter ports as members of a NIC team using the following parameters:
Use NetTeam as the team name.
Configure Ethernet 3 through Ethernet 6 as members of the team.
Verify the speeds of the individual connections.
Answer Question 1.
Teaming mode: LACP
Load balancing mode: Address Hash
Standby adapter: None (all adapters Active)
Configure the Hyper-V Virtual Switch Manager to use the new NIC team for the External network using the Microsoft Network Adapter Multiplexor Driver.
Verify the status and speed of your network connection in Network and Sharing Center.
Answer Question 2.