Electric Concrete Saw Cutting Through a Cinder Block Wall - Installing a new doorway

This is not a sponsored video, I bought this saw to do a few projects and wanted to show how it works. I'm showing in this video cutting a opening in cinder block wall to install a new door with Evaluation electric dry cut concrete saw. There was a window where I cut this opening so above is a steel lintel across the top of the opening. Never cut an opening in a wall unless there is a support (lintel) that spans across the opening and is supported on both sides. I also show how to take the blocks out and give some info on the saw at the end of the video. This is a dry cut saw only, next time I'm going to try a vacuum and add a filter to the air inlet on the motor to prolong the life of the saw. The saw works really well but I've only used it for two projects so far. When cutting in a doorway you should make it wide enough for framing on both sides and room for shims to rough in the new door. I used a dust mask outside at first than switched to a respirator for inside because the dust was crazy. Big Thanks to my Subscribers, hope you're all doing well. I'll be posting homemade machines, electrical, DIY and other projects soon. Thanks for Watching, If you're new to the channel ‪@kurtscottage‬ Please consider subscribing and turning on notifications. Peace