BMW G8X Wheel Spacers - finally a 2pc design that makes running 10mm SAFE!

Shop here: https://www.bimmerworld.com/5x112-10m...

Wheel Spacer Paper Test Video:    • MUST WATCH if you run WHEEL SPACERS -...  

Our BimmerWorld 10mm Wheel Spacers are specifically designed to fit the segmented hubcentric lip on BMW G8X models - G87 M2, G80 M3, G82 M4, including xDrive cars. A 10mm was a tricky fit on the hub but we solved it by designing the spacer and lip as two pieces - the 10mm flat spacer and a NEW hubcentric lip that fits with the existing lip and locks in place between the tabs on the hub. This new lip has a surface area equal to the original (within 0.5mm) so there won't be any interference or loss of surface area for your existing wheels.

Note 1: this hub extender only fits on a hub with tabs/prongs/teeth/fingers/cutouts. It will not fit on a hub that has a full surface lip around the circumference.

Note 2: hub, spacer, and wheel must fit together with zero gap between them. A gap between any component is a cause for failure. Check for a snug fitment with no wobble on each component. Click this link to learn more and watch a video of our paper test to ensure a proper and safe fitment.

Note 3: these 10mm spacers must only be used with our hub extender. Never use the flat spacer on its own.

#bimmerworld #wheelspacers #bmw #trackcar #g8x #m3 #m4 #m2 #g80 #g82 #g87 #m3comp #m4comp #xdrive #mpower