Introducing Interstate 75W - RGB LED matrix driver with Pico W Aboard

I heard you liked matrices, so how about you attached a matrix to your matrix to make a matrix squared!:
https://shop.pimoroni.com/products/in...

An all-in-one, Raspberry Pi Pico W powered controller for HUB75 LED matrix panels.

Interstate 75 W is a Pico W-based driver board for HUB75-style LED matrices. It's designed to plug neatly into the back of a LED panel, and provides a quick and easy way to whip up some scrolling signage or an eye-catching LED display for sensor outputs. Because it has a Raspberry Pi Pico W aboard you can also use it to display information from the internet! 🌎

I75 W is powered from the Pico W's micro-USB port, which should also be able to power a few connected panels happily, assuming you're not planning anything too eye-bleedingly bright. There's also two useful buttons, a reset button and an onboard RGB LED.

We've also popped a QW/ST connector on there, to make it super easy to plug in Qwiic or STEMMA QT breakouts.

Here are some things you could do!

🚌 Tap into an API and display bus times, plane tracking or traffic info.

📈 Generate a big bold graph showing air quality or other sensor readings.

💡 Create some ad hoc, easily adjustable signage for your classroom, maker stall or kebab shop.

💾 Scroll greetz to your crew, just like in the old days:

"`-._,-'"`-._,-' HACKED AND PACKED BY PIMORONI "`-._,-'"`-._,-'
Features
Raspberry Pi Pico W Aboard
Powered by RP2040 (Dual Arm Cortex M0+ running at up to 133Mhz with 264kB of SRAM)
2MB of QSPI flash supporting XiP
Powered and programmable by USB micro-B
2.4GHz wireless
Compatible with our 32x32, 32x64 and 64x64 LED matrices.
Sturdy screw terminals for powering the LED panels.
Qw/ST (Qwiic/STEMMA QT) connector
Two user buttons
Reset button
RGB LED
Fully-assembled (no soldering required)
Measurements: approx 64.3 x 40 x 18mm (L x W x H, including connectors)
C++/MicroPython libraries