Printer is in an Error State | Printer Error in Windows 10/11 {Six Possible Solutions}

Unable to print and getting the error message "Printer in an error state" in Windows 10 or Windows 11? You can fix it easily by one of these six methods.

First of all, make sure "Connect Automatically" is enabled in wifi connection settings if you are using wifi direct printer. Secondly make sure your printer has paper and paper is not jammed!

Method 1: Go to control panel - hardware and sound - printers and devices - printers and scanners - troubleshoot

Method 2: open print queue and clear/cancel the print queue

Method 3: remove the device from printer settings. Add again to reinstall the drivers.

method 4: services - print spoooler - right click and restart. Open it and chage the startup type to automatic to prevent the problem from reoccurring.

Method 5: command prompt - right click & run as admin. Type the following commands and hit the enter key after each

taskkill.exe /f /im printfilterpipelinesvc.exe
net stop spooler

now press Windows Key + R to open Run. Type Spool and click on OK. Go to Printers folder and delete all files inside the printers. go back to command prompt admin and type the following commands one by one

sc config spooler start= auto
printfilterpipelinesvc.exe
net start spooler

Method 6: go to device manager. right click and uninstall all itmes under print queues and printers. Just uninstall! Don't delete or remove if asked. Click on Action on the top and scan for hardware changes twice. Or just restart your system to apply the changes.

Hope this helps!
Iviewgle