3D Print Not Sticking? 9 Ways to Get Perfect Bed Adhesion

The first layer is the most important in 3D printing. If it does not adhere properly, the print will not succeed and the time and filament spent will be wasted. However, there are many ways to increase print bed adhesion.

🧠 Here is the link to my 3D printing course:
https://elopage.com/s/the3dprinterbee...

🔗 Buy Magigoo:
https://amzn.to/3KAxrXx *

🔗 Buy a PEI print bed in different sizes:
https://amzn.to/40NhkLK *


⏱ Timestamps:
00:00 Intro
00:15 Clean the print bed
00:30 Level the print bed
01:08 Reduce the z-offset
01:58 Print the first layer slower
02:29 Do not cool the first layer
02:42 Increase the print bed temperature
03:00 Print higher and thicker lines
03:37 Print mouse ears or a raft
04:35 Apply salt/sugar solution
05:09 Apply adhesive
06:02 Use different print bed
06:30 Outro



Disclosure: Links marked with * are Affiliate Links. I earn from qualifying purchases if you decide to make a purchase through these links – at no additional cost for you!

Find tips, printer profiles, tutorials and hands-on reviews of the best 3D printers here: https://the3dprinterbee.com/

#3Dprinting #DIY #3Dprinter