How to replace Ignition Lock Housing 2002-2009 Chevrolet Trailblazer

Buy Now!
New Ignition Lock Housing from 1AAuto.com http://1aau.to/ia/1AIMX00167

This video shows you how to replace the Ignition Lock Housing in your 2002-2009 Chevrolet Trailblazer.

This process should be similar on the following vehicles:
2002 Chevrolet Trailblazer
2003 Chevrolet Trailblazer
2004 Chevrolet Trailblazer
2005 Chevrolet Trailblazer
2006 Chevrolet Trailblazer
2007 Chevrolet Trailblazer
2008 Chevrolet Trailblazer
2009 Chevrolet Trailblazer

Tools you will need:
• Phillips Head Screwdriver http://1aau.to/oPS/1AXAA00013
• 10mm Socket http://1aau.to/oIL/1AXAA00017
• 21mm Socket http://1aau.to/os5/1AXAA00043
• 4mm Socket
• 7mm Socket http://1aau.to/oIL/1AXAA00017
• Wire Cutters
• E5 Socket
• T25 Driver http://1aau.to/oiW/1AXAA00008
• Ratchet http://1aau.to/oTe/1AXAA00016
• Torque Wrench http://1aau.to/ozz/1AXAA00044
• Drill
• Safety Glasses http://1aau.to/oeq/1AXAA00343
• Magnet - Extendable
• Pick http://1aau.to/ojm/1AXAA00037

Subscribe:    / @trq  

Check out our playlist:
Chevy Trailblazer 2002-2009 1st Generation:    • Chevy Trailblazer 2002-2009 1st Gener...  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.