EPSILON COMPETITION 3 Glider 3500MM PNP 4S STAUFENBIEL Flight review

Petrincic Bros RC Tshirts & stuff: https://shop.spreadshirt.com/petrini-...
Donations to keep this RC family together: https://www.paypal.com/cgi-bin/webscr...

Presenting the third generation of Staufenbiels dynamic all-rounder

Staufenbiels Epsilon Competition 3 is a floater for all conditions that isn’t afraid of aerobatics. By using the proven steel wing joiner we have made the wing extremely robust and it can take it if you want to shift your flight style to sport mode on the slope. The model boasts a painted fiberglass fuselage for a nice seamless finish. Wings and fuselage have been reinforced with carbon fibre. The foam core wings are sheeted with high quality abachi wood and have flaps. The wings come pre-covered in ORACOVER foil

Go hunting for thermals with the Epsilon Competition 3 and have fun descending while doing aerobatics like loopings, rolls and turns.
Features
Painted fiberglass fuselage
Foam core abachi wings covered with ORACOVER foil
Pre-installed HIMAX brushless outrunner C3526-870KV (only PNP-Version)
Metal gear servos pre-installed in frames (only PNP-Version)
All wiring pre-installed and done with MPX connectors and secure servo connectors (only PNP-Version)
Fuselage and wing reinforced with carbon fibre
Aluminium motor mount installed
All control horns made from aluminium
Wing alignment pins made from fiberglass
Including a 14x8“ folding prop (when using a 4S configuration please use 12x8”) (only PNP-Version)
Aluminium spinner included (only PNP-Version)
Including a well-illustrated manual
Needed to complete
60A ESC
3S 4000-5000mAh LiPo / If using a 4S LiPo a 12 x 8" folding prop is needed
LiPo charger
Transmitter and receiver with at least six channels