VMP Performance | 2011-2014 F-150 Supercharger Kit Install

Do you have the need for speed and more power? Do you want want to up the ante on your 2011-2014 Ford F-150? VMP's Gen3 2.65 L TVS supercharger kit will get your '11-'14 F-150 600-plus horsepower to the wheels!

This step-by-step installation guide, shows you how to take your stock '11-'14 Ford F-150 to a 600-plus horsepower power house with the VMP Supercharger Stage 3 kit.

Important note below!

***VMP has recently changed the FEAD system for our superchargers. Please do not make ANY front cover modifications prior to reading the instructions provided with the kit you are installing. Failure to follow these instructions could result in damage to the vehicle.**

0:13 | Drain fuel system
0:42 | Disconnect the battery
0:52 | Remove intake
1:16 | Remove brake aspirator
1:30 | Remove fuel rails
2:57 | Disconnect PCV lines
3:08 | Remove intake manifold
4:16 | Tape off cylinder heads
4:33 | Drain coolant
4:52 | Remove driver side heater hose
4:59 | Remove coolant reservoir
5:54 | Modifying the knock sensor harness
8:18 | Remove the belts
9:08 | Remove AC system belt tensioner and idler pulley
9:31 | Grind down the four engine bosses (skip this step with new no-grind FEAD)
10:26 | Water outlet replacement
11:10 | Lower intake installation
12:07 | Install FIAD bracket
14:15 | AC pulley and crank shaft pulley modification
18:12 | Install spider bracket
19:01 | Install smooth idlers
19:26 | Reinstall water pump pulley
20:08 | Remove front bumper
20:55 | Air diffuser modification
21:35 | Install heat exchanger
23:27 | Route heat exchanger hoses
24:52 | Mount heat exchanger reservoir
26:32 | Route the heat exchanger wiring
28:10 | Throttle body and EVAP extension harness
29:28 | Assemble and install fuel rails
32:21 | Connect VMP harness
32:53 | Route and mount heat exchanger harness power supply
34:03 | Install IAT2 harness
36:36 | Install new spark plugs
37:05 | Reinstall bumper
37:47 | Mount new cooling system
38:53 | Assemble the supercharger
40:58 | Install supercharger
41:54 | Install supercharger pulley
43:13 | Modify heater hose
44:46 | Install throttle body and billet spacer
46:01 | Modify and install aspirator tube
49:24 | Assemble and install cold air intake
52:22 | Connect water outlet to coolant reservoir
52:45 | Install factory mass airflow sensor
52:58 | Fill degas bottle and heat exchanger reservoir
53:19 | Reconnect battery
53:29 | Reinstall fuel pump relay
53:37 | Load tune
53:56 | Wrap up

------------------------------------------

Our live shows are now available in MP3 format!
Soundcloud ➤   / vmpperformance  
Itunes ➤ http://bit.ly/VMPPerformancePodcast
Google Play ➤ http://bit.ly/VMPGooglePlayPodcast

Have ideas for future shows? Let us know in the comments below!

------------------------------------------

Have you seen our shows?

Tune in each week for:
✪Tuning Tuesday | Tuesdays at 1:30 PM EDT ✪Burnout Box | Thursdays at 6 PM EDT

-------------------------------------------

Subscribe & Follow: ►YouTube: http://bit.ly/VMPSubscribe
►Facebook: http://bit.ly/VMPFacebook
►Instagram: http://bit.ly/VMPInstagram
►Twitter: http://bit.ly/VMPPerformanceTwitter
►Website: http://vmpperformance.com