How to Replace Driver's Side Outer Tie Rod 2008-2010 Ford F-250

Buy Now!
New Tie Rod from 1AAuto.com http://1aau.to/ia/1ASTE00465

This video shows you how to install a driver's side outer tie rod on your 2008-2010 Ford F-250. Outer tie rods, sometimes referred to as “tie rod ends,” connect the steering rack to the steering knuckle. Their joints can wear out over time, causing loose steering, vibrations, and uneven tire wear. They are also a common failure point in localities with safety inspections.

This process should be similar on the following vehicles:
2008 Ford F-250 Super Duty
2009 Ford F-250 Super Duty
2010 Ford F-250 Super Duty

Tools you will need:
• 13mm Socket http://1aau.to/oa7x/1AXAA00015
• 15mm Socket http://1aau.to/oa7x/1AXAA00015
• 21mm Socket http://1aau.to/o4E/1AXAA00043
• 22mm Socket http://1aau.to/omz/1AXAA00266
• Pliers
• Side Cutters
• 1/2 Inch Impact Gun http://1aau.to/oou/1AXAA00252
• 3/8 Inch Impact Gun
• Torque Wrench http://1aau.to/oaoQ/1AXAA00044
• Anti-Seize Grease
• Gloves http://1aau.to/oCZ/1AXSS00048
• Rust Penetrant
• Safety Glasses http://1aau.to/owI/1AXAA00343
• Chisel http://1aau.to/ojR/1AXAA00055
• Floor Jack http://1aau.to/oR5/1AXAA00068
• Hammer http://1aau.to/oMD/1AXAA00091
• Wheel Chocks
• Wire Brush http://1aau.to/oqr/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.