TUTORIAL 1 - HOW TO BECOME INTO AN EMBROIDERY OPERATOR | CAMFive EMBROIDERY MACHINE SETTING THREADS

Is important that you fully know your CAMFive EMBroidery Machine for proper handling and to achieve the best results. Get the most out of your Machine! 🔥

In this first Video Tutorial of our "How to become an embroidery operator" series, you'll find how to install the threads 🧵, the frames, and the fabric materials 👕.


1. First you have to place the thread reels on the Top Frame.

2. Once you put the threads on the Top Frame, you must take every single one of them through the holes.

3. With the threads in position, next we have to put them to the needles.

4. If a thread breaks when you’re mid embroidering, a red light will turn on and the machine will stop. You can change the thread by pulling the other end through the needle’s hole and restarting the work.

5. Then how to install the arms for the frames. When you place the arms in the bar, use an Allen wrench and tighten it.

6. Once you set the ring, proceed placing the material first, followed by the fabric and then the frame

7. Place the frame face up and push. See if they’re hooked to the arms.


Subscribe to our YouTube channel to enjoy more CAMFive EMB videos. Don't forget to subscribe and click on the notification bell 🔔 so you don't miss any video of this series.