Samsung Galaxy A10S LCD Replacement Change screen

Aidez-nous à améliorer notre Chaîne, Merci:
   / @hitech76  

Help us improve our Channel, Thank you:
   / @hitech76  


1.Insert a tool or a SIM ejector tip, or an unfolded paperclip, into the hole in the SIM tray, located to the left of the a10s phone.
2.Gently insert an opening pick between the screen and the back cover at the bottom of the phone where the charging port is.
3.Slide opening pick along the left edge gently, toward the upper left corner, to open the clips on your phone.
4. Detach the rear shell.
5. Unscrew the three 3 mm screws to remove the cable cover.
6. Pry up the motherboard cover with the flat end using a screwdriver to release the plastic clips that hold it in place.
7.Remove the motherboard cover.
8.Disconnect the battery by prying vertically on the connector with a spatula.
9.Heat the battery to facilitate extraction.
10. Heat the panel and remove your screen.
11.Clean the location of the old slab.
12. Apply glue to the ends of the frame.
13.Put the new slab in position.


#ab_software