How to Replace Front Lower Control Arm 2001-2007 Toyota Highlander

Buy Now!
New Control Arm from 1AAuto.com http://1aau.to/ia/1ASLF00294

Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle. This video shows you how to install new control arms in your 2001-2007 Toyota Highlander.

This process should be similar on the following vehicles:
2001 Toyota Highlander
2002 Toyota Highlander
2003 Toyota Highlander
2004 Toyota Highlander
2005 Toyota Highlander
2006 Toyota Highlander
2007 Toyota Highlander

Tools you will need:
• Pry Bar http://1aau.to/onD/1AXAA00020
• 17mm Wrench http://1aau.to/ooi/1AXAA00010
• 19mm Wrench http://1aau.to/ooi/1AXAA00010
• 12mm Socket http://1aau.to/oS3/1AXAA00015
• 14mm Socket http://1aau.to/oS3/1AXAA00015
• 17mm Socket http://1aau.to/oS3/1AXAA00015
• 19mm Socket http://1aau.to/ouE/1AXAA00043
• 21mm Socket http://1aau.to/ouE/1AXAA00043
• 22mm Socket http://1aau.to/ods/1AXAA00266
• Ratchet http://1aau.to/oXb/1AXAA00016
• Socket Extensions http://1aau.to/oS3/1AXAA00015
• Torque Wrench http://1aau.to/oBI/1AXAA00044
• Liquid Thread Locker
• Floor Jack http://1aau.to/opV/1AXAA00068
• Hammer http://1aau.to/ooG/1AXAA00091
• Jack Stands http://1aau.to/oow/1AXAA00065
• Pick http://1aau.to/okq/1AXAA00037

Subscribe:    / @trq  

Check out our playlist:
2001-2007 Toyota Highlander 1st Generation:    • 2001-2007 Toyota Highlander 1st Gener...  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.