How to setup ANNKE DVR/NVR on the monitor

Video transcription:

Hi everyone, today I’m going to introduce you to the smart search, H.264+, and motion detection email alarm function of your newest DVR. These are only some of the many features you’ll be enjoying with our security products. This video also applies to the DVR series including DN41R, DN81R and DN61R.

First I’m going to demonstrate how to use the smart search function.
Now you’re going to want to drag your mouse to the top and click on the menu icon.
Then click the playback icon on the far left.
In the drop down menu select smart, then on the following page select the play icon for Camera 01.
After that move your cursor to the bottom of the page where you’ll find a wrench icon. This is for your settings. Click it.
First, check the box for Skip Non-Related Video and then press okay. This will take you directly to the moment motion was detected.

Now I’m going to show you how to set up your H.264+
From here you’re going to click the menu icon at the top. Select record, and then parameters.
You’re going to want to check the box to enable H.264+ for Camera 01. H.264+ enables you to record more efficiently and preserve disc space. Then click apply, and then yes. This reboots the system.
Click the Menu icon again. Click Maintenance, and then System info.
Select Record at the top. Notice the bitrate difference for cameras A1 and A2 after enabling H.264+.

Now, we are going to explore how to set your email alert.
From here you’re going to once again select Menu, then Configuration, and then Network.
Once you’re in configuration select email.
In the top left you’ll see a box to Enable Server. Check it.
In the top right box you’re going to type the SMTP Server IP address or host name.
Then write your username in the username box, and then type in SMTP Port. No.
After this, type in your password.
On the right there is going to be a box that says Enable SSL. This sets up an encrypted connection. Check it.
Next you’re going to want to type in a sender name and an email for sender’s address.
Select a receiver, and then just like before, type in a receiver’s name and email address. Of course, these can be the same as those above.
Make sure to check the box to enable picture attachments. Next you’re going to want to select a time interval for sending pictures.
You can also test to see if everything is in order by sending a test email here.
Next just click Apply, and then OK.
After this you’re going to select Camera, and then in the drop down menu click Camera.
Select Motion, and then find the gear icon. This is for Settings. Click it.
Select Linkage Action, and then just check the box for Send Email to enable this function.
Select Apply, then OK, and then Back and you’re good to go.


Now let’s check out your email and look at the snapshots you received after motion was detected.

And there you have it, hopefully now you understand how to set up your email alarms, H.264+, and smart search function. As for our other exciting features, such as our smart remote access and day and night vision, feel free to explore our website and learn more.

Well that’s all for these three features for now. If you have any questions feel free to watch this video again or contact our support team for help.

Official website
Global: https://www.annke.com/
UK: https://uk.annke.com/
DE: https://de.annke.com/
FR: https://fr.annke.com/
IT: https://it.annke.com/
ES: https://es.annke.com/

AMZ Store
AMZ US: https://amzn.to/3cDHuge
AMZ UK: https://amzn.to/3R9Id7P
AMZ DE: https://amzn.to/3TyEtOW
AMZ FR: https://amzn.to/3TwK8VT
AMZ IT: https://amzn.to/3B4ClY3
AMZ ES: https://amzn.to/3q5Q22M