How To Install Outside Taps: Hot And Cold

If you're looking to get a tap fitted in your garden, do it yourself by watching this no nonsense step-by-step outside tap installation video.

Learn how to fix an outside tap that's not working https://housewarm.co.uk/outside-tap-n...

How to fit an outside tap - Full guide https://housewarm.co.uk/how-to-fit-an...

Learn how to fit an outside tap (or 2) from a full-time plumber. Hot and cold outside taps were fitted on this job which was pretty straightforward, but they're not always.


✅ Buy me a coffee ☕️ 👍 https://www.buymeacoffee.com/housewarm


You can use an SDS drill to drill the screw holes as well, but I like to use my combi drill.

Drill bits used for this installation:
● Pilot hole 10mm x 450mm
● Large hole 18mm x 450mm
● Screw holes 6mm


Video chapters for quick access:

00:00 Measuring up
00:30 Drilling the pilot holes
02:52 Drilling the main holes
05:59 Marking the screw holes
07:36 Drilling the screw holes
10:30 Fitting the wall plugs
10:44 Fitting the back plate
13:08 Fitting the taps
14:54 Connecting to the water supply
19:10 Testing the taps


Get an outside tap fitted in Newcastle upon Tyne by an experienced plumber https://housewarm.co.uk/plumbing/outs...

#plumbingtips #Housewarm #plumbing