etrailer | Valterra RV Sewer - Waste Valves - T40 Review

Описание к видео etrailer | Valterra RV Sewer - Waste Valves - T40 Review

Click for more info and reviews of this Valterra RV Waste Valves:
https://www.etrailer.com/RV-Waste-Val...
Check out some similar RV Waste Valves options:
https://www.etrailer.com/dept-pg-RV_W...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Valt...
Today we're going to take a look at the Valterra RV waste valve. It has the 3-inch hub side and a 3-inch spigot side. This is made of a durable, hard plastic construction. This waste valve will replace a broken or warn out one on your RV's black water tank. It is used to stop or allow the flow from the tank. You notice when you open it, it has a 3-inch diameter passage which will allow waste to travel freely when it's open.

When you do close it, there are seals in there, which will tightly seal off the black water pipes when it's closed. The 3-inch waste valve body, which is this whole section right here, with the handle on it, is a Bladex design. It is used to open or close the tube opening on the waste valve. The valve body itself, you can see when you open it, has a nice metal shaft with the plastic handle. If you notice the plastic handle is color-coated black also to let you know it's for the black water tank. I just want to give you a few internal dimensions here.

On the hub side, the internal dimension is going to be right at 3 1/2 inches, and on the spigot side, internal is going to be right at 3 inches. That should do it for the review on the Valterra RV waste valve, the 3-inch hub side and the 3-inch spigot side.

Комментарии

Информация по комментариям в разработке