How to Replace the Anode in a Water Heater | Repair and Replace

What does an anode rod do? How do I replace an anode rod? In this episode of Repair and Replace, Vance shows how to remove the anode rod to check the corrosion. Water heaters are vulnerable to rust and corrosion. The anode rod acts as a lighting rod, sacrificing itself to protect the tank. Most anode rods will last 4-6 years. If the anode rod dissolves or becomes completely encased with calcium then it will no longer protect the tank and will need to be replaced.

Buy water heater repair parts online: https://www.amresupply.com/catalog/Ho...

How to Relight the Pilot    • How to Relight the Pilot in a Water H...  

Water Heater Maintenance Guide    • Gas Water Heater - Maintenance Guide ...  

How do gas water heaters work? Learn about the basic operation, safety features and the differences between conventional and electronic gas valves in this video:    • How Do Gas Water Heaters Work? | Repa...  

Water Heater Troubleshooting and Repair Guides    • Water Heater Troubleshooting & Repairs  

___________________________

00:00 Intro
01:01 How it Works
02:11 Anode Types
02:49 What You'll Need
03:09 Disconnect the Water Heater
03:49 Drain Some Water
4:20 Remove the Anode
5:14 Install the Anode
6:10 Refill the Tank
___________________________


AMRE Supply provides homeowners, service contractors, and property management with the parts and knowledge needed to get the best performance out of any property. Stocking the largest selection of appliance parts, heating, plumbing, lighting, and janitorial supplies, AMRE ships almost anywhere in Canada within 24 - 48 hours. Expert help is available online, over the phone or in person at one of the many locations across Canada.

Connect with AMRE Supply
Website - https://www.amresupply.com/
Facebook -   / amresupply  
Twitter -   / amresupply  
Instagram -   / amresupply  
Google Plus - https://plus.google.com/+amresupplyca...