Hardest RYFT Bash EVER!! VITAVON!!!

EPIC!!! This was the hardest I've ever driven the RYFT!! VITAVON FOR THE WIN!!!
Use the links below to support Exocaged RC!!! Thanks!!!

Axial Ryft
Amain https://bit.ly/2LPoVrS (Orange)
Amain https://bit.ly/2XAbJcS (Black)
Ebay https://ebay.us/njMNCl (Orange)
Ebay https://ebay.us/TIY5DV (Black)
Horizon https://bit.ly/2Ovk686 (Both Available)

Pm Arthur Tsang on fb messenger in this group to get on the list to get a set of these. https://www.facebook.com/groups/VITAV...
Email Arthur at [email protected] and order directly

Ryft Straight rod ends
Horizon https://bit.ly/30QhLrs

Ryft Angled rod ends
Horizon https://bit.ly/3s7Bm28

Ryft Stock trailing arms
Horizon https://bit.ly/38OAic2

DSM Offroad Mini Snatch Straps
https://www.dsmoffroad.com/products/m...

Castle Monster X ESC
Amain https://bit.ly/2Yids6B

Amazon https://amzn.to/3trZEEi
Ebay https://ebay.us/wAWtsO

The Swaybar:
I used the front part of a Hot Racing Swaybar kit for a Bomber, the chassis bushings I got from MOFO Rc, Links down below for those. I assembled and drilled them out gently with a 1/8" bit to fit the 1/8 piano wire for the torsion bar. I also drilled out the bar ends of the Hot Racing arms to fit the new bigger bar. Very carefully I cut a flat on each end of the bar so the arm set screws would hold in place. The links to the axle are approximately 68mm long eye to eye so use whatever you have to achieve that. At the bottom I used a spacer from a kit from Dixieland RC to make up the gap, I went back later and added one to the top to straighten up the links. Hope this helps!! I have put links to the swaybar kit down below and the Castle esc and holmes motor or equivalent, please use them to support Exocaged RC Thanks!!!

Hot Racing Swaybar, I can only find the set, its possible the rear part may go right in with longer links.
Amain https://bit.ly/30i9Cx0

Amazon https://amzn.to/3vhSVi6
Ebay https://ebay.us/QWqG32

.125 spring steel rod
Amazon https://amzn.to/2Q2N5RI
Ebay https://ebay.us/bruU1f

You can message MOFO on his FB page here for the bushings   / mofoxrc  
or if you have a printer you can print them yourself here:
https://www.thingiverse.com/thing:478...

Holmes Recommends this motor over what I used
https://holmeshobbies.com/motors/brus...

Holmes Hobbies 2100kv 540 XL Puller Pro ( Used in this video )
Holmes https://holmeshobbies.com/motors/brus...
Ebay https://ebay.us/tBMSj4

Flysky GT5 Radio
Amazon https://amzn.to/30M4a4c
Ebay https://ebay.us/Fpihsu

CHANNEL MEMBER INFO
If you would like to be a channel member now's the time! I will start a monthly giveaway in a direct paypal payment in the amount of TWICE your monthly membership fees, they are $1.99, $4.99, $9.99 and for the big guys $24.99. So you could win $4,$10,$20, or even $50 depending on your level. Take a look!    / @exocagedrc