A wood one piece garage door

This video is about 1pc Wood Door built from scratch start to finish to show you how much effort and work goes into a project like this.
Materials used...
*2-2x4x16's top and bottom rails cut to 15'11"
*11-2x3x8 stringers cut to 6'9"
*Frame nailed with 20p Galv nails
*4 sheets of 4x8 3/8 rs ply with another two sheets ripped for design.
*1 tube of white painters caulking, used to seal all seams from water soaking in behind the design and rotting out the ply...which is what happened to the old door.
*Grey bottom seal, we were gonna seal the sides as well but changed our minds.
TOOLS
*Worm drive saw
*Chop saw
*Router
*Staple gun and 1 1/4 inch staples
*Hammer...22oz Estwing (no waffle head)
*6-16p nails three on each end
*E-900 Hardware
*2-Holmes 528 springs 1 on each side
*2 Holmes 728 springs 1 on each side
*2 truss rods borrowed from customers old door seeing as they are tough to come by these days...1 top and 1 bottom
*2-loyal employees to do the heavy lifting!
* All-Pro does not do painting so she had it painted by a professional painter.

Music by Footage Firm
Air Raid-Lic#5009-144-110512
Crowning Glory-Lic#50017-152-110512