Minn kota stock VS APC prop (10X4 APC vs 10X5M-LH APC vs Stock) links to props in description!!!

I test 3 props for both my trolling motors on my Intex mariner 4 boat in a head to head battle measuring speed vs current draw, the results are mind blowing to say the least... if you would like to try these props for yourself, here are the links....

10X5m-LH prop https://www.apcprop.com/product/10x5m...

10X4p-LHprop
https://www.apcprop.com/product/10x4p...

IMPORTANT NOTE!!! if you go to APC's website.... there are two different 10X5 props, make sure you select and order the one in the link.... 10X5m-LH, it is very important so that you may get the correct prop... I'm sorry for any confusion.

If you're handy with a drill, I recommend these props also to try on your trolling motor, just use a 3/8 drill bit to open up the hub where the shaft goes in, and get a small file to carve a spot for the sheer pin!!!

9X4.5 prop for 30lb trolling motors - https://amzn.to/464W5ar ONLY $2.80 !!!

10X4.5 prop for 40lb to 55lb motor - https://amzn.to/44P0Unf ONLY $3.16 !!!

NOTE: I haven't tried these particular props, but I have drilled and filed others alike and they worked fine for me!!! I hold no responsibility for any damage or injury that may be caused by altering your trolling motor.

Hey everyone, if your interested, here are some links to the same gear I use!!! hope it helps


Intex mariner 4 boat - https://amzn.to/3PkQvKG

Intex motor mount - https://amzn.to/3EwGQLS

12v lifepo4 battery - https://amzn.to/3Ez7NhW

Scotty rod mount - https://amzn.to/4633Iyi

Scotty back plate - https://amzn.to/465knkR

Enduramax motor - https://amzn.to/45MqJ8V