Cantek MX340M Edgebander - J & G Machinery

Used Cantek MX340M - J & G Machinery, A Division of Wurth Baer Supply

FEATURES:
PLC Control system with LED display and keypad
Workpiece is fed by chain
Edge coil support plate
Edge feeding is automatic with a thickness capacity of 0.4 to 3 mm
Strip material can be hand fed
Coil edge bands up to 3 mm in thickness in Hard-PVC/ABS are cut with guillotine shears
Teflon coated hot-melt glue pot
Spring loaded pressure unit with (2) pressure rollers
8,800 RPM end trimming unit
10,500 RPM top and bottom trimmers with insert knife cutters for radius trimming and bevel trimming
Radius scraper with 2 mm radius
Top and bottom buffing units
Heavy duty pressure beam with extendable workpiece support
Heated infeed fence for pre-heating the panel from optimum glue penetration

SPECIFICATIONS:
Feed speed: 23 FPM
0.472" (12 mm) to 1.77" (45 mm) Panel thickness capacity
0.4 to 3 mm edgebanding thickness capacity
Minimum panel width: 4.75"
Minimum panel length: 6.69"
Total connected power: 5 HP
Machine dimensions: 115" x 47" x 48"
Machine weight: 968 Lbs.
30 Amps at 230 V SINGLE PHASE