MAKE THESE MAGNETIC PADDLE SHIFTERS DIY SIM RACING

DIY Sim racing 3d printed magnetic shift paddles can be added to a custom wheel or upgrade to your sim racing wheel. These paddles would work great on an OSW or custom DIY F1, GT wheel.

-- Free download 3D Shifter files -----
https://amstudioprojects.com/shifters/

Parts per Paddle Shifter
6x M3 Nuts https://ebay.us/S5tnyu
2x M3 Cap socket screws 10mm https://ebay.us/SUFQW9
5x M3 Cap socket screws 30mm https://ebay.us/SUFQW9
2x Neodymium magnets 8x5mm https://ebay.us/lm7RxK
1x Micro lever switch kw-10 https://ebay.us/n5Z6pn

Wire http://bit.ly/2J6PkgM
Hot glue https://bit.ly/3QdbptT
Superglue https://ebay.us/hEYjCv
Solder http://bit.ly/2MK4Tuy
Soldering Iron https://ebay.us/VIwU6k
This site contains affiliate links for which I may be compensated


Total cost breakdown of parts for the completed build seen in the video per assembled paddle shifter is $2.50 USD

Print settings printed on the Cocoon Create Touch
PLA - Black
Layer height 0.2mm
Infill - 50%

Thank you for watching, all questions and feedback are welcome.
If you know someone interested in this project please share the video with them.

Check here for other SIM Projects, Mods and DIY
   / @amstudioprojects  

|Shifter design Credit to JKOLJO|

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
https://creativecommons.org/licenses/...

Copyright
© AMSTUDIO 2018 All rights reserved | https://amstudioprojects.com