How to Connect a Yamaha DM3 Dante to a Tio1608-D Dante Stage Box

The Yamaha DM3-D audio console features not only 16 local XLR inputs, but it also has a 16x16 Dante interface working with both 96kHz and 48kHz sample rates! In this video I'll show you how to connect the Yamaha DM3-D to a Yamaha Tio1608-D stage box.


Yamaha DM3-D Dante Version
Sweetwater: https://sweetwater.sjv.io/DK2mdn
Guitar Center: https://guitar-center.pxf.io/PyPgdY

Yamaha DM3S (Non-Dante)
Sweetwater: https://sweetwater.sjv.io/Gmo226
Guitar Center: https://guitar-center.pxf.io/jrv465


Chapters:
00:00 Introduction
00:37 Yamaha DM3-D Sample Rate Configuration
01:30 Importance of Sample Rate Matching
02:01 Configuring Dante Network: Daisy Chain vs. Redundant Mode
06:00 Configuring Primary and Secondary Ports
07:37 Additional DM3-D Network Settings and Bit Rate Configuration
08:11 Setting the Preferred Leader
09:07 Dante Patch Setup on Yamaha DM3
09:45 Configuring the Yamaha Tio1608-D Settings
11:00 Unit ID and Quick Config Setup
11:47 Power Cycling the Unit and Finalizing Connection
12:10 Patching Dante Channels on Yamaha DM3
13:01 Utilizing All Inputs and Effects Channels via Dante
15:00 Additional Tips for Corporate Setup
16:25 Conclusion and Additional Resources