TIG Butt Welding: Scout 800 Fender

https://www.proshaper.com
Our Amazon Storefront:
https://www.amazon.com/shop/proshaper

TIG Butt Welding: Scout 800 Fender

We finally made it back to the Scout Fender. In the last video, Wray spoke about two students who wanted to make some patch panels so they used the Scout fender we were working on. At the end of the 4 day class, the patch panels had been tac welded into place. This video starts off with Wray, cleaning the butt join with a wire wheel and then grinding the tac welds down. Using a soft body dolly and body hammer Wray made sure that there was no peak where the two panels met. After it's been sufficiently worked, Wray uses the Everlast tig welder we have, but instead of the foot pedal, he used the on off button which acted as a pulse. For some reason, our microphones would cut out the second he touched the button. We initially wanted to have the panel all finished but we ran out of time due to our sound issues. The next video Wray will grind the weld, planish the panel and then use the shrinking disc to make sure we have a smooth transition.

Email: [email protected]
Website: https://www.proshaper.com
Facebook:   / proshaper  
Instagram:   / proshaper  
Twitter:   / proshaperm  
Linkedin:   / pros.  .