Fuga Shock Application Video

Eco-friendly cleaner, ready to use, for removing residues and stains of epoxy
resins, ideal for use in GreenBuilding.
Fuga-Shock Eco has a specific cleaning action that removes residue and stains from ceramic tile, vitrified tile and glass mosaic coverings.
Use
To eliminate residues and stains of Fugalite® from tiled surfaces.
Substrates:
ceramic and vitrified tiles
glass mosaic
Do not use
On surfaces that are not resistant to basic agents. On marble and natural stone it is advisable to carry out a test in advance.
Preparation of substrates
The coating materials must first be cleaned to remove any dust. Fugalite® must be fully hardened.
Preparation
Fuga-Shock Eco is a ready-to-use transparent liquid. Shake the bottle well before opening in order to redisperse the liquid evenly.
Application
It is advisable to perform a preliminary test before applying it on the entire tiled area. Apply Fuga-Shock Eco evenly to the surface to be
cleaned with a rough scrubbing pad and leave it until the dirt to be removed begins to visibly lift; this may take a few minutes or up to 3 – 5
minutes depending on the quantity, the elapsed time after fixing (at least 7 days) and the degree of absorption of the surface. Scrape the
surface mechanically with abrasive felt pads. Once cleaned, rinse well and dry carefully. The use of wet vacuum makes the operation
easier and ensures the complete removal of residue. In the case of large surface areas, a mechanical buffer with an abrasive felt pad
for the removing operation is recommended. Repeat for highly stubborn dirt.
Leaving the product to act for more than 5 minutes may result in physical and colour alterations in the grout.
Cleaning
Residues of Fuga-Shock Eco can be cleaned from tools by rinsing them thoroughly with water.
Note : Fuga-Shock Eco is a liquid detergent. Before using the product, it is advisable to hermetically seal all doors, windows, rubber seals,
furniture, varnished/painted elements, bathtubs and shower trays made of synthetic materials such as methacrylate, PVC, etc..and any
surface that could be attacked through direct contact with the detergent or with vapours.
Leaving the product to act for more than 5 minutes may result in physical and colour alterations in the grout.
Download TDS :
https://products.kerakoll.com/en-IN/p...