Adding a Winch To A Uhaul Trailer

Finally a solid option for us “DYI” guys with no help to get a car onto a Uhaul. I was researching a winch for my garage to pul cars into the shop, and I saw a few options/suggestions for other parts. Saw a few pieces that would allow me to use a winch while loading a Uhaul Trailer. I went looking on YouTube and found a young brother that did EXACTLY what I was trying to do. I reached out to bro and found out he follows me and on the Gram. He said I could use a part of his vid to stitch something together. I’ll leave all his info on his page and YouTube vid below. 🗣 THANKS AGAIN BROTHER !!!!

‪@CatlocosGarage‬ Uhaul Trailer Bid lnk belle

   • How to Add a Winch to a U-Haul Transp...  

Follow ya boy on the gram… @warrengbody

  / warrengbody  

ROCSHOPWARREN YouTube Page

   / @warrengbody  

Elco Warren YouTube…

   / @elcowarren  

UHAUL PARTS

TOW STRAP

https://www.harborfreight.com/3333-lb...

12,000lb Winch Hitch Mount

https://www.harborfreight.com/12000-l...

Dual Hitch Extender

https://www.harborfreight.com/dual-hi...

5/8” Hitch Pin

https://www.harborfreight.com/5-8-eig...

5/8 in. Trailer Coupler Pin Lock with 2 Keys


https://www.harborfreight.com/5-8-eig...


ARP Header bolts 434-1203

https://www.summitracing.com/parts/ar...

ARP Water pump bolts 12 point Stainless pn ARP 434-1201

https://www.summitracing.com/parts/ar...

Remflex 2072 LS header gasket

https://www.summitracing.com/search/p...

Remflex SBC header gasket pn 2004

https://www.summitracing.com/parts/rf...

ARPStarter bolt

https://www.summitracing.com/parts/ar...

ARP Intake bolt

https://www.summitracing.com/parts/ar...

ARP Oil pan bolt

https://www.summitracing.com/parts/ar...

ARP timing cover bolt

https://www.summitracing.com/parts/ar...


Moser 28 spline axles with screw in stud AND press in stud option…

https://www.summitracing.com/parts/MS...

Moser axle bearing kit…

https://www.summitracing.com/parts/MS...

ARP 1/2” screw in studs

https://www.summitracing.com/parts/AR...

Lug nuts for 1/2” studs 1/2”-20

https://www.summitracing.com/parts/CA...

ARP Studs used for the front setup p/n 100-7702 7/16-20

https://www.summitracing.com/parts/ar...

Wheel lug for above stud 7/16-20 P/N 711-106

https://www.summitracing.com/parts/rn...

Another ARP press in Wheel stud option p/n 100-7708

https://www.summitracing.com/parts/ar...

12mm x 1.5 Right Hand Thread for above arp wheel stud P/N 711-306 Thread M12-1.50 righ hand thread

https://www.summitracing.com/parts/rn...

Moser 1350 yoke for 8.5 10 bolt

https://www.summitracing.com/parts/ms...

Jegs

https://www.jegs.com/i/Moser-Engineer...


LS coil pack covers…

https://www.corvettemods.com/LS-Chevr...

Holley level 1 Swap Kit for the 4L80e trans

https://www.holley.com/products/ls_po...


7.5 8.5 rear end clean up…

https://gbodyforum.com/threads/rear-e...

78 Malibu Buimd #dtoxbu

https://gbodyforum.com/threads/78-mal...

Flickr photos for all the projects…

https://www.flickr.com/photos/bumpin1...