Скачать или смотреть Heavy Duty Drill Restoration, Bosch 1103

@Dany_FIX_DIY #Boschprofessional #Drill #restoration #machining #powertools

Intro:
Hi everyone thank you a lot for the support
Today we are going to attempt to restore this hand held heavy duty drill capable of drilling through steel using up to 24mm twist drills.
Most likely produced in the late 60's, this model has been replaced by the Bosch GBM 24-2 E .
Normally used on a stand as drill press or a magnetic base, this drill is meant to be handheld operated too.
But lacking of a safety clutch I wouldn't recommend to do that, it can be done let's say up to 13mm but on bigger sizes and especially on Morse taper bit can results in serious injuries

Link to the restored tools used in the video

Makita cutoff saw restoration part 1
   • Pt-1 Vintage Metal Cut Off Saw Restoration...  

Makita cutoff saw restoration part 2
   • Pt2- Vintage Metal Cut Off Saw Restoration...  

BAIER EHS1 Restoration
   • Hand Held Cold Saw Restoration,  BAIER EHS1  

Hitachi G12SE2 restoration
   • Angle grinder restoration...kinda, HITACHI...  

Chapters
00:00 removing the chuck
00:20 removing brush covers and carbon brushes
01:07 rear handle disassembly
01:23 disassembling the main handle
02:40 disconnecting electricals
03:35 filter capacitor
03:45 removing the gearbox
04:31 removing the stator
05:30 removing the brush olders
06:00 disassembling the gearbox
07:20 completely disassembled
07:27 plastics restoration
08:28 painting
08:43 reassembling the gearbox
11:30 installing stator windings
12:57 joining electrical and mechanical parts
13:46 making a new speed change gear lever
16:20 connecting all the electrical parts
17:40 installing the main handle
18:20 installing carbon brushes
18:56 assembling the rear handle
19:17 inserting the chuck
19:27 building a new auxiliary handle
20:30 restoration complete and testing
21:14 before after
Thank again for watching be sure to leave a like if you enjoyed and subscribe if you haven't already
See you soon