Logo video2dn
  • Сохранить видео с ютуба
  • Категории
    • Музыка
    • Кино и Анимация
    • Автомобили
    • Животные
    • Спорт
    • Путешествия
    • Игры
    • Люди и Блоги
    • Юмор
    • Развлечения
    • Новости и Политика
    • Howto и Стиль
    • Diy своими руками
    • Образование
    • Наука и Технологии
    • Некоммерческие Организации
  • О сайте

Скачать или смотреть SparkFun Qwiic Particulate Matter Sensor - Unboxing | DigiKey

  • DigiKey Product Discovery
  • 2025-08-20
  • 26810
SparkFun Qwiic Particulate Matter Sensor - Unboxing | DigiKey
I2C sensorIoTPM1.0PM10PM2.5Particulate Matter SensorQwiicQwiic connectorSTEMSparkFunair monitoringair pollutionair qualityatmospheric sensingdust sensorembedded sensorenvironmental sensorlaser scatteringmicrocontroller compatibleparticle sensorsensor module
  • ok logo

Скачать SparkFun Qwiic Particulate Matter Sensor - Unboxing | DigiKey бесплатно в качестве 4к (2к / 1080p)

У нас вы можете скачать бесплатно SparkFun Qwiic Particulate Matter Sensor - Unboxing | DigiKey или посмотреть видео с ютуба в максимальном доступном качестве.

Для скачивания выберите вариант из формы ниже:

  • Информация по загрузке:

Cкачать музыку SparkFun Qwiic Particulate Matter Sensor - Unboxing | DigiKey бесплатно в формате MP3:

Если иконки загрузки не отобразились, ПОЖАЛУЙСТА, НАЖМИТЕ ЗДЕСЬ или обновите страницу
Если у вас возникли трудности с загрузкой, пожалуйста, свяжитесь с нами по контактам, указанным в нижней части страницы.
Спасибо за использование сервиса video2dn.com

Описание к видео SparkFun Qwiic Particulate Matter Sensor - Unboxing | DigiKey

Inside the box, you’ll find the BMV080 on a breakout board with a Qwiic connector, and the board is pre-installed in an enclosure with a glass cover over the sensor optics. Don’t touch the glass.

In this demo, we’re going to connect the sensor to a SparkFun IoT RedBoard and load an example application using the Arduino IDE.
Connect the sensor to the IoT RedBoard using a Qwiic cable and connect the IoT RedBoard to the PC with a USB-C cable.

Open the Arduino IDE. Before starting, you need to install the ESP32 board package and the SparkFun BMV080 Arduino library. You’ll also need to request the BMV080 SDK from Bosch and copy files from that into the Arduino library. Complete details are available in the sensor hookup guide.

Once the software is ready, navigate to the examples included with the sensor library, and open the Basic Readings example. Select the SparkFun RedBoard IoT and its port, then upload the sketch. If it fails and says the wrong boot mode is detected, start the upload again and while it’s compiling press and hold the boot button on the board then press the reset button, and continue to hold the boot button until it starts uploading.

Open the serial monitor and you can see sensor readings, listed in micrograms per cubic meter. Thankfully, we don’t have many pollutants in the air here.

Setting Up Arduino - SparkFun Air Quality PM1/PM2.5/PM10 Sensor - BMV080 (Qwiic) Hookup Guide

Maker.io - https://www.digikey.com/en/maker
DigiKey’s Blog – TheCircuit https://www.digikey.com/en/blog
Connect with DigiKey on Facebook   / digikey.electronics  
And follow us on X https://x.com/digikey

Комментарии

Информация по комментариям в разработке

Похожие видео

  • О нас
  • Контакты
  • Отказ от ответственности - Disclaimer
  • Условия использования сайта - TOS
  • Политика конфиденциальности

video2dn Copyright © 2023 - 2025

Контакты для правообладателей [email protected]