How to replace the rear brake discs and pads Trafic mk3 🚗

BUY THE AUTO PARTS you need for the operation : 👉 http://bit.ly/cheapAutoparts 👈
📱 DOWNLOAD THE APP : 🍎 http://bit.ly/MCD12AppStore, 🤖 : http://bit.ly/MCD12PlayStore 📱
⬇︎⬇︎ 🔥 🔧🔧🔧 🔥⬇︎⬇︎

🛠📏⚙ FIND ALL THE PARTS AND TOOLS NEEDED AND RECOMMENDED BY USETOOL EN ⚙📏🛠

Needed parts:
Brake discs : https://maclede12.co/diskR108665en

Brake cleaner : http://bit.ly/brakecleaneren

Brake pads : https://bit.ly/padsFBOLD021010en

Copper grease : http://bit.ly/coppergreaseen

💪 TIGHTENING TORQUES
Hub nut : 280 Nm
Caliper mount screws : 180 Nm
Slide pins bolts : 33 Nm

Discover a vast array of services that will help you run the maintenance of your car: vehicle user manuals, maintenance planning and mechanics-oriented tutorials!
Rear brake rotors and pads on a Renault Trafic mk3.

Discover the world of UseTool EN on

Needed tools:
-💣🤖🏆The complete toolbox recommended by UseTool EN to repair your Trafic 3 : https://maclede12.co/toolboxCLASOS3050en 🏆🤖💣

Big flat head screwdriver
15mm spanner
Socket wrench
Wheel lug wrench
Torque wrench : https://maclede12.co/torquewrenchCLAS..., https://maclede12.co/torquewrenchCLAS..., https://maclede12.co/torquewrenchCLAS...
13mm socket
21mm socket
T-handle wrench
Paper towel
Piece of tissue
Hammer
Wire brush
Brake caliper windback tool : http://bit.ly/brakecaliperwindbacktool
36mm socket
Chisel

🔝💪Safely lift your Trafic 3 with the hydraulic jack: https://maclede12.co/jackCLASOH5304en and axle stands: https://maclede12.co/standsCLASOM3030en recommended by UseTool EN 💪🔝

Hydraulic jack
Axle stand

🚗📢💡 RESOURCES 💡📢🚗

Usetool's warnings
Once the operation is completed, you'll need pump slowly on the brake pedal a few times until feeling a strong resistance from the pedal. The aim being to bring the brake pads closer to one other.

Drive smoothly and avoid sudden braking for the first 50 kilometres or so to avoid glazing the new pads.

Make sure to check the stability of your vehicle before starting the operation.

Don't burn yourself on the pads if you've just gone for a drive as braking creates friction and long-lasting heat.

Usetool's info
When replacing brake rotors, you also need to replace the brake pads. This is a mandatory procedure.

What do we mean by "glazing new brake pads"?

Break pads are made of a material that needs to be run-in when new. If this procedure is not done properly, when braking too hard, the material overheats and hardens. Consequently, the brakes become less effective.

📽❤️🚨 USEFUL VIDEOS 🚨❤️📽
[ USETOOL'S TIPS & TRICKS ] Lifting your vehicle safely :    • How to (PROPERLY) lift your vehicle s...  

[ USETOOL'S TIPS & TRICKS ] Removing and reinstalling a wheel :    • ASTUCE : Pneu crevé ? Déposer et repo...  

Space Race by tubebackr |   / tubebackr  
Music promoted by https://www.free-stock-music.com

Terms and conditions of the offer : https://www.mister-auto.co.uk/operati...

Disclaimer: This video was created for information purposes and does not guarantee the outcome of actions undertaken.
To ensure that you see the best results, we recommend getting in contact with qualified technicians who will carry out the installation.
This video provides tips and recommendations that can be useful when repairing or changing parts. MCD12 and its partners cannot be held responsible for any physical and material damage that comes from the poor installation or incorrect interpretation of the video content.
This video was created for information purposes and does not guarantee any outcomes. The user is solely responsible for the incorrect use of repair machines, tools and parts, in particular if these may cause physical damage. MCD12 and its partners recommend taking great care and carefully following the safety rules when carrying out the repair or replacement of any parts. Please keep in mind that using poor quality parts compromises the safety of the driver when on the road.

0:00 Intro
0:15 Remove the pads
1:48 Remove the rotor
2:41 Replace the rotor
4:29 Replace the pads
5:36 Tips